Low Carbon Steel Wire Mesh Welding Machine 6-40 PRM 2300MM Height
2. Machine Description
Are you familiar with Wire Mesh Welding Machine?
Regarding to the Wire Mesh Welding Machine, usually called wedge
wire screen welding machine.it is produced through the method of
electric resistance welding:wires with special profile are welded
to supporting wires at 90 degrees angle.
At present ,basing on the Water well screen welding machine good
features(Fine slot size, high filtering precision, firm structure,
high temperature, and corrosion resistance),wedge wire screen
almost instead of bridge screen, slotted screen, and others.
Our Wire Mesh Welding Machine is an special equipment for making
wedge wire screen,wire wrapped screen ,johnson screen ,and water
well screen etc.
Wire Mesh Welding Machine------- Fundamentals Of Welding
how to weld wire mesh?
Mesh welding equipment adopts the method of electric resistance
Controlled by the Numeral control system, the servo motor drives
the ball screw as well as the drawing disk which is mounted on the
straight rail, so the slot clearance can be adjusted by touching
the control screen without stopping the machine.
1) Machine body in casting improve structure stability .
2) Adopting advanced world famous brand components in ballscrew and
linear guide .
3) High pressure double crank to control the die opening and
4) Running in a Mitsubishi control system ensuring system
stability,clear guidance,easy operation.
5) Apply a Humanized design, which can remote control the limited
ballscrew move back and forth, with improvement of the cantilever
type control panel
It is easy to change the data on the touching screen.
Lock-expanding ring is equipped on the machine. After the operator
feeds the longitudinal wire, expand and lock the wire with the
It saves time and material during unload the filter tube.It is easy
to learn how to control the machine.
3 HWJ300 Mesh Welding Machine/Low Carbon Steel Wire Mesh Welding
|1||Diameter of filter tube||Max.300mm,Min.80mm.|
|2||Max. Length of filter tube||Max.6000mm|
|3||Rod and wire diameter||1.0mm to 3mm.|
|4||Material||Carbon steel, stainless steel|
Mitsubishi double-drive servo motor
Two sets:7.5KW,One set:3.5KW
|6||Power of welding transformer||200KVA|
|7||Welding speed is adjustable according to the tube diameter||Max.40rpm,6rpm|
|9||precision of slot||±0.03mm|